Study on mechanical properties of dual-channel cryogenic 3D printing scaffold for mandibular defect repair.

Mandibular defect repair has always been a clinical challenge, facing technical bottleneck. The new materials directly affect technological breakthroughs in mandibular defect repair field. Our aim is to fabricate a scaffold of advanced biomaterials for repairing of small mandibular defect. Therefore, a novel dual-channel scaffold consisting of silk fibroin/collagen type-I/hydroxyapatite (SCH) and polycaprolactone/hydroxyapatite (PCL/HA) was fabricated by cryogenic 3D printing technology with double nozzles. The mechanical properties and behaviors of the dual-channel scaffold were investigated by performing uniaxial compression, creep, stress relaxation, and ratcheting experiments respectively. The experiments indicated that the dual-channel scaffold was typical non-linear viscoelastic consistent with cancellous tissue; the Young's modulus of this scaffold was 60.1 kPa. Finite element analysis (FEA) was employed performing a numerical simulation to evaluate the implantation effect in mandible. The stress distribution of the contact area between scaffold and defect was uniform, the maximum Mises stress of cortical bone and cancellous bone in defect area were 54.520 MPa and 3.196 MPa, and the maximum displacement of cortical bone and cancellous bone in defect area were 0.1575 mm and 0.1555 mm respectively, which distributed in the incisor region. The peak maximum Mises stress experienced by the implanted scaffold was 3.128 × 10-3 MPa, and the maximum displacement was 6.453 × 10-2 mm distributed near incisor area. The displacement distribution of the scaffold was consistent with that of cortical and cancellous bone. The scaffold recovered well when the force applied on it disappeared. Above all, the dual-channel scaffold had excellent bio-mechanical properties in implanting mandible, which provides a new idea for the reconstruction of irregular bone defects in the mandible and has good clinical development prospects.

Experimental study on the interface characteristics of geogrid-reinforced gravelly soil based on pull-out tests.

The factors influencing geogrid-soil interface characteristics are critical design parameters in some geotechnical designs. This study describes pull-out tests performed on gravelly soils commonly encountered in the Xinjiang region and reinforced with two types of geogrids. The factors affecting the geogrid-gravelly soil interface properties are investigated with different experimental loading methods (pull-out velocity, normal stress), geogrid types, and soil particle size distributions and water contents. The ultimate pull-out force increases with the normal stress and pull-out velocity. Furthermore, with increasing coarse particle content and water content, the ultimate pull-out force increases and then decreases sharply. Based on these research results, this paper provides reasonable parameters and recommendations for the design and pull-out testing of reinforced soil in engineering structures. In reinforced soil structure design, the grid depth should be increased appropriately, and the coarse particle content of the overlying soil should be between 30 and 40%. During construction, the gravelly soil should be compacted to the maximum compaction at the optimal water content, and the structure should have a reasonable waterproofing system. According to the calculation results of the interface strength parameters, the uniaxial geogrid-gravelly soil interface has a high cohesive force csg, which should not be ignored in reinforced soil structure design.

OPN silencing reduces hypoxic pulmonary hypertension via PI3K-AKT-induced protective autophagy.

Hypoxic pulmonary hypertension (HPH) is a pulmonary vascular disease primarily characterized by progressive pulmonary vascular remodeling in a hypoxic environment, posing a significant clinical challenge. Leveraging data from the Gene Expression Omnibus (GEO) and human autophagy-specific databases, osteopontin (OPN) emerged as a differentially expressed gene, upregulated in cardiovascular diseases such as pulmonary arterial hypertension (PAH). Despite this association, the precise mechanism by which OPN regulates autophagy in HPH remains unclear, prompting the focus of this study. Through biosignature analysis, we observed significant alterations in the PI3K-AKT signaling pathway in PAH-associated autophagy. Subsequently, we utilized an animal model of OPNfl/fl-TAGLN-Cre mice and PASMCs with OPN shRNA to validate these findings. Our results revealed right ventricular hypertrophy and elevated mean pulmonary arterial pressure (mPAP) in hypoxic pulmonary hypertension model mice. Notably, these effects were attenuated in conditionally deleted OPN-knockout mice or OPN-silenced hypoxic PASMCs. Furthermore, hypoxic PASMCs with OPN shRNA exhibited increased autophagy compared to those in hypoxia alone. Consistent findings from in vivo and in vitro experiments indicated that OPN inhibition during hypoxia reduced PI3K expression while increasing LC3B and Beclin1 expression. Similarly, PASMCs exposed to hypoxia and PI3K inhibitors had higher expression levels of LC3B and Beclin1 and suppressed AKT expression. Based on these findings, our study suggests that OPNfl/fl-TAGLN-Cre effectively alleviates HPH, potentially through OPN-mediated inhibition of autophagy, thereby promoting PASMCs proliferation via the PI3K-AKT signaling pathway. Consequently, OPN emerges as a novel therapeutic target for HPH.

Effect of Alkyl Chain Length on the Corrosion Inhibition Performance of Imidazolium-Based Ionic Liquids for Carbon Steel in 1 M HCl Solution: Experimental Evaluation and Theoretical Analysis.

In this study, five kinds of 1-alkyl-3-methylimidazolium bromide ([CXami]Br) ionic liquids with different alkyl chain lengths (8, 10, 12, 14, and 16) were selected as inhibitors. Then, their corrosion inhibition performances for Q235 steel in 1.0 mol L-1 HCl solution were investigated via a weight loss test, polarization curve method, and surface analysis techniques. The results show that these five imidazolium-based ionic liquids are all mixed-type inhibitors, and they can be spontaneously adsorbed onto the Q235 steel surface. The adsorption process follows the Langmuir model and involves mixed physical-chemical adsorption. Theoretical calculations confirm that the increase in alkyl chain length is conducive to the imidazolium-based ionic liquids exhibiting stronger chemical bonding abilities and forming denser adsorption films. The inhibition efficiency significantly increases below the critical micelle concentration (CMC) with an increase in alkyl chain length, and the highest inhibition efficiency is 95.17% for the [C16ami]Br inhibitor at the concentration of 0.005 mM. However, above the CMC, the inhibition efficiency is minimally affected by the alkyl chain length since all ionic liquid inhibitors have reached adsorption saturation on the steel surface.

Thermosensitive hydrogel with programmed dual-octenidine release combating biofilm for the treatment of apical periodontitis.

The utilization of intracanal medicaments is an indispensable procedure in root-canal treatment. However, the conventional intracanal medicaments still need improvement regarding antimicrobial efficacy and ease of clinical operation. To address the above issues, OCT/PECT@OCT + ALK composite hydrogel characterized by programming sequential release of dual antimicrobial agents has been proposed. Thanks to the self-assemble ability of amphiphilic copolymer poly(ε-caprolactone-co-1,4,8-trioxa [4.6]spiro-9-undecanone)-poly(ethylene glycol)-poly(ε-caprolactone-co-1,4,8-trioxa[4.6]spiro-9-undecanone) (PECT), dual hydrophilic and hydrophobic antimicrobial agents could be easily encapsulated in the hydrogel system and tailored for sequential drug release for a better antibiofilm effect. The hydrophilic octenidine (Octenidine dihydrochloride, OCT-HCl) is encapsulated in the hydrophilic part of hydrogel for instantaneous elevating the drug concentration through bursting release, and the hydrophobic octenidine (Octenidine, OCT) is further loaded into the PECT nanoparticles to achieve a slower and sustained-release profile. Additionally, calcium hydroxide (Ca(OH)2) was incorporated into the system and evenly dispersed among PECT nanoparticles to create an alkaline (ALK) environment, synergistically enhancing the antibiofilm effect with higher efficiency and prolonged duration. The antibiofilm effect has been demonstrated in root-canal models and apical periodontitis rats, exhibiting superior performance compared to clinically used Ca(OH)2 paste. This study demonstrates that OCT/PECT@OCT + ALK composite thermosensitive hydrogel is a potential intracanal medicament with excellent antibiofilm effect and clinical operability.

The long-term developmental outcomes of children born to mothers with systemic lupus erythematosus at different parities.

BACKGROUND: In recent years, China has adjusted its fertility policies to optimize the population structure by implementing the two-child and three-child policies. Some patients with systemic lupus erythematosus (SLE) are considering the possibility of having a second child. The issue is whether the offspring from the second childbirth will have favorable long-term developmental outcomes. OBJECTIVE: The research aims to investigate the long-term physical, neurological, and social-emotional development outcomes of children born to mothers with SLE at different parities. This study aims to offer valuable insights and references for SLE patients who are considering subsequent pregnancies and require information about potential developmental outcomes for their future children. METHODS: The study conducted a follow-up of children born to SLE mothers who were admitted to the obstetrics department between January 1, 2016, and September 30, 2021. The SLE patients were categorized into two groups based on their history of live delivery: the primiparity group and the multiparity group. The physical development status, including weight, height (length), and other relevant factors, was evaluated in both groups. The Ages and Stages Questionnaires, Third Edition (ASQ-3) was utilized to assess the neurological development in five domains, encompassing communication, gross motor, fine motor, problem solving and personal-social. Social-emotional development was assessed using the Ages and Stages Questionnaires: Social-Emotional (ASQ:SE). The weight, height (length), body mass index, and ASQ-3 domain scores were standardized into Z-scores to enable comparison across various ages and genders. RESULTS: The study revealed that the weight Z-score and BMI Z-score of the children in the multiparity group were significantly higher compared to those in the primiparity group. However, there were no statistically significant differences in the proportions of overweight and obesity between the two groups. In terms of neurological developmental outcomes, the Z-scores of the communication and gross motor domains in the ASQ-3 assessment were significantly higher in the multiparity group compared to those in the primiparity group. The proportion of abnormal screening for social and emotional development in the children of the multiparity group was lower than that of the primiparity group, although this difference did not reach statistical significance. CONCLUSIONS: The long-term weight development, communication and gross motor development of children born to SLE patients in the multiparity group were better than those in the primiparity group. However, there was no significant difference in social-emotional development between the two groups.

Structural Characterization and Physiological Role of Bombyx mori Fibroinase in the Silk Gland Development.

Silkworm is a highly valuable insect that produces silk through secretion by a silk gland. Within this gland, a type of cathepsin L protease called Fibroinase was identified as an enzyme for hydrolyzing the primary components of silk, including fibroin and sericin. Here, we determined the crystal structure of Fibroinase fromBombyx mori at a resolution of 1.56 Å. Comparative structural analysis revealed that Fibroinase adopted a similar structural pattern with papain-type cathepsin, consisting of an N-terminal domain and a C-terminal domain. The interface between the domains forms a substrate-binding cleft, where the E64 inhibitor noncovalently binds in a novel manner. Additionally, computational simulations combined with biochemical analysis allowed us to define the binding mode and inhibition mechanism of physiological inhibitor Bombyx cysteine protease inhibitor (BCPI) with Fibroinase. Moreover, the expression profiles and RNA interference of Fibroinase indicated its critical role in removing silk proteins in the silk gland lumen and the destruction of silk gland tissue during the larval-pupal metamorphosis. These findings enhance our understanding of the structural and biochemical features of Fibroinase and its inhibitors, while also providing evidence for the physiological role of Fibroinase in silk gland development.

Positional cloning and characterization reveal the role of TaSRN-3D and TaBSR1 in the regulation of seminal root number in wheat.

Seminal roots play a critical role in water and nutrient absorption, particularly in the early developmental stages of wheat. However, the genes responsible for controlling SRN in wheat remain largely unknown. Genetic mapping and functional analyses identified a candidate gene (TraesCS3D01G137200, TaSRN-3D) encoding a Ser/Thr kinase glycogen synthase kinase 3 (STKc_GSK3) that regulated SRN in wheat. Additionally, experiments involving hormone treatment, nitrate absorption and protein interaction were conducted to explore the regulatory mechanism of TaSRN-3D. Results showed that the TaSRN-3D4332 allele inhibited seminal roots initiation and development, while loss-of-function mutants showed significantly higher seminal root number (SRN). Exogenous application of epi-brassinolide could increase the SRN in a HS2-allelic background. Furthermore, chlorate sensitivity and 15N uptake assays revealed that a higher number of seminal roots promoted nitrate accumulation. TaBSR1 (BIN2-related SRN Regulator 1, orthologous to OsGRF4/GL2 in rice) acts as an interactor of TaSRN-3D and promotes TaBSR1 degradation to reduce SRN. This study provides valuable insights into understanding the genetic basis and regulatory network of SRN in wheat, highlighting their roles as potential targets for root-based improvement in wheat breeding.

Genome-Wide Association Study Identifies IFIH1 and HLA-DQB1*05:02 Loci Associated With Anti-NMDAR Encephalitis.

BACKGROUND AND OBJECTIVES: Anti-N-methyl-d-aspartate receptor (NMDAR) encephalitis is a rare autoimmune neurologic disorder, the genetic etiology of which remains poorly understood. Our study aims to investigate the genetic basis of this disease in the Chinese Han population. METHODS: We performed a genome-wide association study and fine-mapping study within the major histocompatibility complex (MHC) region of 413 Chinese patients with anti-NMDAR encephalitis recruited from 6 large tertiary hospitals and 7,127 healthy controls. RESULTS: Our genome-wide association analysis identified a strong association at the IFIH1 locus on chromosome 2q24.2 (rs3747517, p = 1.06 × 10-8, OR = 1.55, 95% CI, 1.34-1.80), outside of the human leukocyte antigen (HLA) region. Furthermore, through a fine-mapping study of the MHC region, we discovered associations for 3 specific HLA class I and II alleles. Notably, HLA-DQB1*05:02 (p = 1.43 × 10-12; OR, 2.10; 95% CI 1.70-2.59) demonstrates the strongest association among classical HLA alleles, closely followed by HLA-A*11:01 (p = 4.36 × 10-7; OR, 1.52; 95% CI 1.29-1.79) and HLA-A*02:07 (p = 1.28 × 10-8; OR, 1.87; 95% CI 1.50-2.31). In addition, we uncovered 2 main HLA amino acid variation associated with anti-NMDAR encephalitis including HLA-DQß1-126H (p = 1.43 × 10-12; OR, 2.10; 95% CI 1.70-2.59), exhibiting a predisposing effect, and HLA-B-97R (p = 3.40 × 10-8; OR, 0.63; 95% CI 0.53-0.74), conferring a protective effect. Computational docking analysis suggested a close relationship between the NR1 subunit of NMDAR and DQB1*05:02. DISCUSSION: Our findings indicate that genetic variation in IFIH1, involved in the type I interferon signaling pathway and innate immunity, along with variations in the HLA class I and class II genes, has substantial implications for the susceptibility to anti-NMDAR encephalitis in the Chinese Han population.

Enhancing the quality of fermented plant leaves: the role of metabolite signatures and associated fungi.

Fungi play a pivotal role in fermentation processes, influencing the breakdown and transformation of metabolites. However, studies focusing on the effects of fungal-metabolite correlations on leaf fermentation quality enhancement are limited. This study investigated specific metabolites and fungi associated with high- and low-quality fermented plant leaves. Their changes were monitored over fermentation periods of 0, 8, 16, and 24 days. The results indicated that organoheterocyclic compounds, lipids, lipid-like molecules, organic nitrogen compounds, phenylpropanoids, and polyketides were predominant in high-quality samples. The fungi Saccharomyces (14.8%) and Thermoascus (4.6%) were predominantly found in these samples. These markers exhibited significant changes during the 24-day fermentation period. The critical influence of fungal community equilibrium was demonstrated by interspecies interactions (e.g., between Saccharomyces and Eurotium). A co-occurrence network analysis identified Saccharomyces as the primary contributor to high-quality samples. These markers collectively enhance the quality and sensory characteristics of the final product.

Construction and characterization of a humanized SLCO1B1 rat model with its application in evaluating the uptake of different statins.

Organic anion-transporting polypeptides 1B1 (OATP1B1) plays a crucial role in the transport of statins. However, there are too few animal models related to OATP1B1, especially humanized animal models. In this study, the human SLCO1B1 cDNA was inserted into the second exon of the rat Slco1b2 gene using CRISPR/Cas9 technology. Pharmacokinetic characteristics of statins were conducted in wild-type (WT), humanized OATP1B1 (hOATP1B1), and OATP1B2 knockout (OATP1B2 KO) rats, respectively. The results showed that human OATP1B1 was successfully expressed in rat liver and exhibited transport function. Furthermore, the pharmacokinetic results revealed that OATP1B1 exhibited varying uptake levels of pivastatin, rosuvastatin, and fluvastatin, leading to different levels of exposure within the body. These results were consistent with those obtained from in vitro experiments using overexpressed cell lines. In conclusion, we established a novel humanized SLCO1B1 transgenic rat model to assess the role of human OATP1B1 in the uptake of different statins. The different uptake mediated by OATP1B1 may be an important reason for the different efficacy of statins. The hOATP1B1 rat is a promising model for improving the prediction of human drug transport.

Flow diverter Combined with Coil Embolization for Acutely Ruptured Intracranial Aneurysms: a single center experience.

BACKGROUND AND PURPOSE: Extensive research has confirmed the safety and effectiveness of flow diverters in the treatment of unruptured intracranial aneurysms. However, their use in cases of acute rupture remains a subject of debate. METHODS: This study was conducted as a single-center retrospective investigation from January 2018 to January 2022 and included patients with acutely ruptured intracranial aneurysms (within three days of rupture) who were treated using the Pipeline Embolization Device (PED) with adjunctive coil embolization. Patient demographics, operative procedures, and outcomes were analyzed. Antiplatelet therapy included intra-arterial tirofiban and postoperative dual therapy with clopidogrel and aspirin. RESULTS: A total of 21 patients (5 males, 16 females) diagnosed with acutely ruptured intracranial aneurysms were included in this study. The aneurysm types included 7 blood blister-like aneurysms (30.0%), 3 dissecting (14.3%), and 1 fusiform aneurysm (4.8%). Perioperative complications occurred in 2 patients (9.5%), and both cases involved thrombogenesis. Nineteen patients completed digital subtraction angiography during follow-up, with an average follow-up time of 8.7 months (5-18 months). Results showed a complete embolization rate of 94.7% (18/19), with a partial aneurysm still present in 1 patient. A total of 90.4% (19/21) of patients had a favorable prognosis (modified Rankin Scale score = 0-2). CONCLUSION: The PED with adjunctive coil embolization proved to be a viable option for managing acutely ruptured intracranial aneurysms, notwithstanding the potential for ischemic complications.

All-solid-state 3-µm single-frequency Er:CaF2 laser with a stable and switchable wavelength.

We have demonstrated a 3-µm all-solid-state single-frequency laser with a stable center frequency and a switchable wavelength using the intra-cavity Fabry-Perot etalon method. Experimentally, the central wavelengths of the laser for the single-longitudinal mode are 2728 and 2794 nm, with maximum output powers of 268 and 440 mW, respectively. The corresponding single-longitudinal mode linewidths are 25 and 11 MHz. In particular, the central wavelengths of the single-longitudinal mode laser remain almost constant as the incident pump power increases. To the best of our knowledge, this study represents the first instance of using a laser diode to directly pump Er:CaF2 block single crystals for single-frequency lasers in the 3 µm region. Additionally, it achieves the highest output power of a 3-µm all-solid-state single-longitudinal mode.

A 50-gene biomarker identifies estrogen receptor-modulating chemicals in a microarray compendium.

High throughput transcriptomics (HTTr) profiling has the potential to rapidly and comprehensively identify molecular targets of environmental chemicals that can be linked to adverse outcomes. We describe here the construction and characterization of a 50-gene expression biomarker designed to identify estrogen receptor (ER) active chemicals in HTTr datasets. Using microarray comparisons, the genes in the biomarker were identified as those that exhibited consistent directional changes when ER was activated (4 ER agonists; 4 ESR1 gene constitutively active mutants) and opposite directional changes when ER was suppressed (4 antagonist treatments; 4 ESR1 knockdown experiments). The biomarker was evaluated as a predictive tool using the Running Fisher algorithm by comparison to annotated gene expression microarray datasets including those evaluating the transcriptional effects of hormones and chemicals in MCF-7 cells. Depending on the reference dataset used, the biomarker had a predictive accuracy for activation of up to 96%. To demonstrate applicability for HTTr data analysis, the biomarker was used to identify ER activators in a set of 15 chemicals that are considered potential bisphenol A (BPA) alternatives examined at up to 10 concentrations in MCF-7 cells and analyzed by full-genome TempO-Seq. Using benchmark dose (BMD) modeling, the biomarker genes stratified the ER potency of BPA alternatives consistent with previous studies. These results demonstrate that the ER biomarker can be used to accurately identify ER activators in transcript profile data derived from MCF-7 cells.

Pulsed Ho:YLF laser intra-cavity pumped by a diode-pumped Q-switched Tm:YAP laser.

We reported an intra-cavity pumped Q-switched laser with dual-wavelength synchronous output at 2066.7 nm and 1940nm. Ho:YLF crystal was pumped by a self-Q-switched Tm:YAP laser, which was served as both a gain medium and a saturable absorber simultaneously. For Ho:YLF laser, under 11.4-W incident pump power, a stable pulse laser was achieved at 2066.7 nm with the highest peak power of 69.65 W and the pulse repetition rate of 42.14 kHz. Under the same incident pump power, the highest peak power and pulse repetition rate of Tm:YAP laser were 17.85 W and 50.82 kHz, corresponding to the central wavelength of 1940nm. These results suggested that Q-switching without additional absorber element were effective way to obtain high-efficiency and compact 2.1 µm pulsed laser.

[Risk factors for cow's milk protein allergy in infants: a multicenter prospective nested case-control study]. / å©´å„¿ç‰›å¥¶è›‹ç™½è¿‡æ•çš„å±é™©å› ç´ ï¼šä¸€é¡¹å¤šä¸­å¿ƒå‰çž»æ€§å·¢å¼ç— ä¾‹å¯¹ç §ç ”ç©¶.

OBJECTIVES: To explore the risk factors associated with cow's milk protein allergy (CMPA) in infants. METHODS: This study was a multicenter prospective nested case-control study conducted in seven medical centers in Beijing, China. Infants aged 0-12 months were included, with 200 cases of CMPA infants and 799 control infants without CMPA. Univariate and multivariate logistic regression analyses were used to investigate the risk factors for the occurrence of CMPA. RESULTS: Univariate logistic regression analysis showed that preterm birth, low birth weight, birth from the first pregnancy, firstborn, spring birth, summer birth, mixed/artificial feeding, and parental history of allergic diseases were associated with an increased risk of CMPA in infants (P<0.05). Multivariate logistic regression analysis revealed that firstborn (OR=1.89, 95%CI: 1.14-3.13), spring birth (OR=3.42, 95%CI: 1.70-6.58), summer birth (OR=2.29, 95%CI: 1.22-4.27), mixed/artificial feeding (OR=1.57, 95%CI: 1.10-2.26), parental history of allergies (OR=2.13, 95%CI: 1.51-3.02), and both parents having allergies (OR=3.15, 95%CI: 1.78-5.56) were risk factors for CMPA in infants (P<0.05). CONCLUSIONS: Firstborn, spring birth, summer birth, mixed/artificial feeding, and a family history of allergies are associated with an increased risk of CMPA in infants.

Massively Reconstructing Hydrogen Bonding Network and Coordination Structure Enabled by a Natural Multifunctional Co-Solvent for Practical Aqueous Zn-Ion Batteries.

The practical application of aqueous Zn-ion batteries (AZIBs) is hindered by the crazy Zn dendrites growth and the H2O-induced side reactions, which rapidly consume the Zn anode and H2O molecules, especially under the lean electrolyte and Zn anode. Herein, a natural disaccharide, d-trehalose (DT), is exploited as a novel multifunctional co-solvent to address the above issues. Molecular dynamics simulations and spectral characterizations demonstrate that DT with abundant polar -OH groups can form strong interactions with Zn2+ ions and H2O molecules, and thus massively reconstruct the coordination structure of Zn2+ ions and the hydrogen bonding network of the electrolyte. Especially, the strong H-bonds between DT and H2O molecules can not only effectively suppress the H2O activity but also prevent the rearrangement of H2O molecules at low temperature. Consequently, the AZIBs using DT30 electrolyte can show high cycling stability even under lean electrolyte (E/C ratio = 2.95 µL mAh-1), low N/P ratio (3.4), and low temperature (-12 °C). As a proof-of-concept, a Zn||LiFePO4 pack with LiFePO4 loading as high as 506.49 mg can be achieved. Therefore, DT as an eco-friendly multifunctional co-solvent provides a sustainable and effective strategy for the practical application of AZIBs.

Coconut shell-derived activated carbon-enhanced water phase change material for cold thermal energy storage.

In building cooling, the demand for cooling surges during specific times, stressing air-conditioner operation, and additional cooling is often wasted during low-demand periods. Water-phase change material (W-PCM)-based thermal energy storage (TES) allows for load shifting and effective management of peak demand by storing cooling energy when the demand is low. This stored energy can be deployed during peak hours, decreasing energy usage and associated CO2 emissions. However, the use of W-PCMs was hindered by phase separation, slow energy transfer, and high supercooling degree (SCD). We synthesized coconut shell (CNS)-produced activated carbon (ACC) to use as a thermal enhancer in W-PCMs for the first time. First, ACC was synthesized from CNS via steam activation. Then, transmission electron microscopy was used to confirm the pore morphology of the CNS-ACC. The synthesis of the W-PCM with various weight percentages (0.1, 0.6, and 1.2) of CNS-ACC was accomplished in two steps. Zeta potential distribution analysis revealed that the W-PCM with CNS-ACC exhibited colloidal stability. Thermal conductivity (TC) and thermogram analyses revealed that a dose of 1.2 wt% CNS-ACC enhanced liquid and solid TC by 9% and 22%, respectively, despite a 6% and 8% decrease in specific heat and latent heat. More specifically, solidification assessment in a spherical enclosure revealed 100% suppression of SCD with 1.2 wt% CNS-ACC. As a result of this and the enhanced TC, the overall solidification process was accelerated, reducing the overall duration by 18.5%. Thus, the combination of CNS-derived ACC and W-PCM for TES in building cooling could reduce energy consumption and associated CO2 emissions.